Christine
Sep 23, 2021
Do you know what you are ordering? Do you have a single door? A pair of doors? Left swing or right?
Doors:
Do you know what you are ordering? Do you have a single door? A pair of doors? Left swing or right? These are very important selections for each cabinet you insert. Make sure you look at each one carefully. When you insert a cabinet into your drawing it looks like the cabinet to the left. Can you tell what your doors are like? Highlight your cabinet and look to the left at your options .
Scroll down until you can see the FRONT SETTINGS. Here you will see your options are None, Left, Pair and Right. Make your selection.
If you choose none, left or right, the cabinet look does not change. If you select a pair, you will see a dividing line down the center.
You can also check your door swings in the interactive view on the right hand side of the design screen
When you select the interactive view, you can click on the area where a door or drawer is located and it will show you the function of what you have selected. In this example, the bottom right of the cabinet was selected.
You can see that it is half of a pair of doors.